| 國際標準: |
| ISO2178:1982 | 在磁性基體上的非磁性復蓋層--復蓋層厚度測量--磁測法
Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness-Magnetic method |
| ISO2360:2003 | 在非磁性金屬基體上的非導電復蓋層--復蓋層厚度測量--渦流法
Non-conductive coatings on non-magneticelectrically conductive basis materials-Measurement of coatingthickness- Amplitude-sensitive eddy current method |
| ISO2361-82E | 磁性和非磁性基體上鍍鎳層厚度的磁性測量方法(NDT,87-2) |
| ISO2361:1982 | 在磁性和非磁性基體上的電鍍層--鍍層厚度測量--磁測法
Electrodeposited nickel coatings on magnetic and non-magnetic substrates-Measurement of coating thickness -- Magnetic method |
| ISO N237 | 鑄鋼件的磁粉探傷 |
| ISO3059:2002 | 無損檢測滲透檢驗和磁粉檢驗 觀察條件 黑光源的間接評定方法（TC135） |
| ISO4309-1981 | 起重機械用鋼絲繩檢驗和報廢實用規范 |
| ISO5065/1 | 磁粉檢驗指示器-第1部分:特性 |
| ISO5065/2 | 磁粉檢驗指示器-第2部分:試驗 |
| ISO DP5578 | 磁粉檢驗用磁化設備 |
| ISO4986:1992 | 鋼鑄件-磁粉檢驗
Steel castings-Magnetic particle inspection |
| ISO6933:1986 | 鐵道軋材--磁粉驗收試驗
Railway rolling stock material -- Magnetic particle acceptance testing |
| ISO9302:1994 | 無縫和焊接( 埋弧焊除外)承壓鋼管--驗證液壓密封性的電磁檢驗
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Electromagnetic testing for verification of hydraulic leak-tightness |
| ISO9304:1989 | 無縫和焊接( 埋弧焊除外)承壓鋼管--探測缺陷的渦流檢驗
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Eddy current testing for the detection of imperfections |
| ISO9402:1989 | 無縫和焊接( 埋弧焊除外)承壓鋼管--探測鐵磁性鋼管縱向缺陷的全圓周磁傳感器/ 漏磁檢驗
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections |
| ISO9598:1989 | 受壓無縫鋼管探測鐵磁性鋼管橫向缺陷的全圓周磁傳感器/ 漏磁檢驗
Seamless steel tubes for pressure purposes-Fullperipheral magnetic transducer/flux leakage testing offerromagnetic steel tubes for the detection of transverseimperfections |
| ISO9934-1:2001 | 無損檢測--磁粉檢測--第1部分:總則
Non-destructive testing-Magnetic particle testing-Part 1:General principles |
| ISO9934-2:2002 | 無損檢測--磁粉檢測--第2部分:檢測介質
Non-destructive testing-Magnetic particletesting-Part 2: Detection media |
| ISO9934-3:2002 | 無損檢測--磁粉檢測--第3部分:設備
Non-destructive testing-Magnetic particle testing-Part 3:Equipment |
| ISO 12718 | 無損檢測--渦流檢測--詞匯 |
| ISO13664:1997 | 無縫和焊制承壓鋼管管端分層缺陷的磁粉檢測
Seamless and welded steel tubes for pressure purposes-Magneticparticle inspection of the tube ends for the detection of laminarimperfections |
| ISO13665:1997 | 無縫和焊制承壓鋼管管體表面缺陷的磁粉檢測
Seamless and welded steel tubes for pressure purposes-Magneticparticle inspection of the tube body for the detection of surfaceimperfections |
| ISO 15548-1 | 無損檢測--渦流檢驗設備--儀器特性與校驗 |
| ISO 15548-2 | 無損檢測--渦流檢驗設備--探頭特性與校驗 |
| ISO 15548-3 | 無損檢測--渦流檢驗設備--系統特性與校驗 |
| ISO15549:1999 | 無損檢測--渦流檢驗--一般原理 |
| ISO 17638:2003 | 焊縫無損檢測--磁粉檢測
Non-destructive testing ofwelds-Magnetic particle testing |
| ISO 17643:2005 | 焊縫無損檢測--利用復平面分析的渦流檢測
Non-destructive testing of welds-Eddy current testing of weldsby complex-plane analysis |
| ISO 23278:2006 | 焊縫無損檢測--焊縫的磁粉檢測--驗收等級 |
| ISO 24497-1 | 無損檢測--金屬磁存儲器-第1部分:一般要求 |
| ISO 24497-2 | 無損檢測--金屬磁存儲器-第2部分:術語與定義 |
| ISO 24497-3 | 無損檢測--金屬磁存儲器-第3部分:焊縫的檢驗 |
| ISO 25902-1 | 鈦管無損檢測--第1部分:渦流檢驗 |
| 歐洲標準化委員會標準： |
| EN1290:1998 | 焊縫無損檢測焊縫的磁粉檢驗
Non-destructive examination of welds-Magnetic particleexamination of welds |
| EN1291:1998 | 焊縫無損檢測焊縫的磁粉檢驗 驗收等級
Non-destructive examination of welds-Magnetic particle testing of welds-Acceptance levels |
| EN1330/5:1998 | 無損檢測詞匯渦流檢測所用術語
Non-destructive testing-Terminology-Part 5:Terms used in Eddycurrent testing |
| EN1369:1996 | 鑄件磁粉檢查 |
| EN1711:2000 | 焊縫無損檢測基于復平面分析的焊縫渦流檢測
Non-destructive examination of welds-Eddy current examination of welds by complex plane analysis |
| EN1956: | 無損檢測滲透檢測和磁粉檢測 |
| EN1971: | 銅和銅合金的渦流檢測 |
| EN2857/1: | 磁粉檢測總則 |
| EN2857/2: | 檢查要求 |
| EN ISO 3059:2001 | 無損檢測 滲透檢測和磁粉檢測觀察條件
Non-destructivetesting-Penetrant testing and magnetic particle testing-Viewingconditions(ISO 3059:2001) |
| EN ISO9934-1:2001/A1:2003 | 無損檢測 磁粉檢測第1部分：一般原理
Non-destructivetesting-Magnetic particle testing-Part 1:General principles(ISO9934-1:2003) |
| EN ISO 9934-2:2002 | 無損檢測 磁粉檢測第2部分：檢測介質
Non-destructivetesting-Magnetic particle testing-Part 2:Detection media(ISO9934-2:2002) |
| EN ISO 9934-3:2002 | 無損檢測 磁粉檢測第3部分：設備
Non-destructivetesting-Magnetic particle testing-Part 3:Equipment(ISO9934-3:2002) |
| EN10228/1:1999 | 磁粉檢查 |
| EN10246/1:1996 | 無縫與焊接（埋弧焊除外）鐵磁性鋼管的自動電磁檢測-驗證液壓密封性 |
| EN10246/2:2000 | 無縫與焊接（埋弧焊除外）奧氏體和奧氏體鐵素體鋼管的自動渦流檢測-驗證液壓密封性 |
| EN10246/3:1999 | 無縫與焊接（埋弧焊除外）鋼管的自動渦流檢測-探傷 |
| EN10246/4:1999 | 無縫鐵磁性鋼管的自動全圓周磁傳感器/漏磁檢測-檢測橫向缺陷 |
| EN10246/5:1999 | 無縫與焊接（埋弧焊除外）鐵磁性鋼管的自動全圓周磁傳感器/漏磁檢測-檢測縱向缺陷 |
| EN10246/12:2000 | 無縫與焊接鐵磁性鋼管的磁粉檢測-檢測表面缺陷 |
| EN10246/18:2000 | 無縫與焊接鐵磁性鋼管管端面的磁粉檢測-檢測層狀缺陷 |
| EN12084:2001/A1:2003 | 無損檢測 渦流檢測一般原理和指南
Non-destructivetesting-Eddy current testing-General principles and guidelines |
| EN 13860-1:2003 | 無損檢測 渦流檢測設備性能與驗證 第1部分：儀器性能與驗證
Non-destructive testing-Eddy current examination-Equipmentcharacteristics and verification-Part 1:Instrument characteristicsand verification |
| EN 13860-2:2003 | 無損檢測 渦流檢測設備性能與驗證 第2部分：探頭性能與驗證
Non-destructive testing-Eddy current examination-Equipmentcharacteristics and verification-Part 2:Probe characteristics andverification |
| EN 13860-3:2003 | 無損檢測 渦流檢測設備性能與驗證 第3部分：系統性能與驗證
Non-destructive testing-Eddy current examination-Equipmentcharacteristics and verification-Part 3:System characteristics andverification |
| EN WI45:2002 | 渦流檢測設備 |
| 美國相關標準 |
| 日本: |
| JIS C2501-1998 | 長久磁鐵試驗方法 Methods of test for permanent magnet |
| JIS G0565-1992 | 鐵磁性材料磁粉檢驗方法及磁粉顯示等級 (INDT,84-2 1982年版)
METHOD FOR MAGNETIC PARTICLE TESTING OF FERROMAGNETIC MATERIALS AND CLASSIFICATION OF MAGNETIC PARTICLE INDICATION |
| JIS G0568-1993 | 鋼制產品的環繞線圈法渦流檢測
Methodfor eddy current testing of steel products by encircling coiltechnique |
| JIS G0583-2004 | 鋼管的渦流檢驗方法 Eddy currentexamination of steel pipes and tubes |
| JIS H0502-1986 | 銅及銅合金管的渦流檢測方法
METHOD OFEDDY CURRENT TESTING FOR COPPER AND COPPER ALLOY PIPES ANDTUBES |
| JIS H 0505-1975 | 有色金屬材料的電阻率及導電率測定方法
Measuring methods for electrical resistivity and conductivityof non-ferrous materials |
| JIS H 0515-1992 | 鈦管的渦流檢驗 Eddy currentinspection of titanium pipes and tubes |
| JIS H 0601:62 | 鍺的電阻率測定方法 |
| JIS H 0602:95 | 硅單晶及硅薄片的四探針法電阻率測定方法 |
| JIS Z 2314-1991 | 渦流試驗儀器性能特性試驗方法
Testmethods for performance characteristics of eddy current testinginstruments |
| JIS Z 2315-1991 | 渦流探傷系統性能特性試驗方法
TESTMETHODS FOR PERFORMANCE CHARACTERISTICS OF EDDY CURRENT FLAWDETECTING SYSTEM |
| JIS Z 2319-1991 | 漏磁試驗方法Methods for magnetic leakage fluxtesting |
| JIS Z 2321-1993 | 用于磁粉檢測的交流磁軛 AC YOKE MAGNETFOR MAGNETIC PARTICLE TESTING |
| JIS Z 2340:2002 | 磁粉和滲透檢驗中目視校驗計較準方法的確認
Confirmation method of calibration by visual calibration gauge onmagnetic particle and liquid penetrant testing |
| JIS Z 2343-3:2001 | 無損檢測 滲透檢測 第3部分：參考試塊
Non-destructive testing -- Penetrant testing -- Part 3: Referencetest blocks |
| JIS Z 8202-5-2000 | 量值和單位 第5部分:電學和磁學Quantities and units - Part 5:Electricity and magnetism |
| JIS W 1202-1986 | 宇航用渦流法對鋁合金熱處理測量的電導試驗
Electrical conductivity test formeasurement of heat treatment of aluminum alloys, eddy currentmethod, for aerospace use |
| JIS W4031-82 | 宇航用磁粉檢驗方法 INSPECTIONPROCESS OF MAGNETIC PARTICLE FOR AEROSPACE USE |
| NDIS3101-84 | 渦流探傷裝置單項性能的測試及其表示方法 |
| NDIS3102-84 | 渦流探傷裝置綜合性能的測試及其表示方法 |
| NDIS3301-77 | 磁粉探傷用C1型標準試片 |
| NDIS3404-82 | 漏磁探傷測試方法(INDT,85-3) |
| NDIS3105-83 | 交流磁軛磁粉檢驗裝置性能與試驗方法 |
| NDIS3403-81 | 表面缺陷檢測方法 |
| 德國: |
| DIN 50470-1980 | 永磁材料的檢測 測定磁軛的退磁曲線和永磁導磁率感應法
Testing of permanentmagnet materials; Determination of the demagnetization curve andpermanent permeability in a yoke; Inductive method |
| DIN 50472-1981 | 長久磁鐵的檢測在工作范圍內測定磁通量值
Testing ofpermanent magnets; determination of the magnetic flux values in theworking range |
| DIN 50933-1987 | 用探針式差動測量器測量涂層厚度
Measurement of coating thickness bydifferential measurement using a stylus instrument |
| DIN50981-79 | 用磁粉法測量鐵素體材料非鐵磁性層的厚度 |
| DIN50984-78 | 用渦流法測量非鐵素體母材的非導電層厚度 |
| DIN50985-77 | 用電容法測量導電母材上非導電層的厚度 |
| DIN54121-65 | 磁粉探傷定義及檢驗證明 |
| DIN 54130-1974 | 無損檢測 漏磁檢測 通則
Non-destructive testing; magneticleakage flux testing, general |
| DIN54131T1-84 | 除攜帶式以外的固定式與移動式磁粉檢驗設備性能及測定方法 |
| DIN54131T2-84 | 攜帶式磁粉檢驗設備性能及測定方法 |
| DIN54132-80 | 磁粉檢驗介質的性能測定 |
| DIN 54136-1-1988 | 無損檢測 帶掃描探頭的漏磁檢測原理
Non-destructive testing;magnetic leakage flux testing by scanning with probes;principles |
| DIN 54140-3-1989 | 無損檢測 電磁法測試線圈組件的圖像和一般特性
Non-destructive testing; electromagnetic methods;representation and general characteristics of test coilassemblies |
| DIN54140T1-76 | 電磁(渦流)法檢測的一般規則 |
| DIN54140T2-84 | 電磁檢測名詞術語 |
| DIN 54141-1-1982 | 無損檢測 管子的渦流檢測用同心試驗線圈和單頻率法檢測的一般注意事項
Non-destructive testing; Eddy current testing of pipes andtubes; General remarks on testing using concentric test coils andthe single-frequency method |
| DIN 54141-2-1982 | 無損檢測 管子的渦流檢測同心試驗線圈的渦流檢測系統性能測定與校驗的參考方法 Non-destructive testing; Eddy current testing of pipes andtubes; Reference method for the determination and calibration ofthe properties of an eddy current testing system using concentrictest coils |
| DIN 54141-3-1987 | 無損檢測 管子的渦流檢測 方法
Non-destructive testing; eddy currenttesting of pipes and tubes; procedure |
| DIN54141T1-82 | 穿過式線圈單頻法管材渦流檢測(NDT,86-1) |
| DIN54141T2-82 | 穿過式線圈渦流檢驗裝置性能的測定方法 |
| DIN54141T3-85 | 渦流檢測的實施 |
| DIN25435T2-79 | 核技術設備定期磁粉檢驗 |
| DIN V VDE V0848-4/A3-1995 | 電磁場中的**性 在0至30KHz頻率范圍的人員防護修訂3
Safety inelectromagnetic fields - Protection of persons in the frequencyrange from 0 to 30 kHz; Amendment A3 |
| DIN EN 1290-2002 | 焊縫的無損檢測 焊縫的磁粉檢測
Non-destructive testing of welds -Magnetic particle testing of welds; German version EN 1290:1998 +A1:2002 |
| DIN EN 1291-2002 | 焊縫的無損檢測 焊縫的磁粉檢測驗收等級
Non-destructivetesting of welds - Magnetic particle testing of welds - Acceptancelevels; German version EN 1291:1998 + A1:2002 |
| DIN EN 1330-5-1998 | 無損檢測術語第5部分:渦流檢測
Non-destructivetesting - Terminology - Part 5: Terms used in Eddy Current testing;trilingual version EN 1330-5:1998 |
| DIN EN 1369-1997 | 鑄造 磁粉檢驗 Founding - Magnetic particle inspection; German version EN 1369:1996 |
| DIN EN 1971-1998 | 銅和銅合金 管子的渦流檢測
Copper and copper alloys - Eddycurrent test for tubes; German version EN 1971:1998 |
| DIN EN 1711-2000 | 焊縫的無損檢驗焊縫的復平面分析渦流檢驗
Non-destructive examination of welds - Eddy current examinationof welds by complex plane analysis; German version EN1711:2000 |
| DIN EN 10228-1-1999 | 鋼鍛件的無損檢測第1部分:磁粉檢驗
Non-destructivetesting of steel forgings - Part 1: Magnetic particle inspection;German version EN 10228-1:1999 |
| DIN EN 10246-1-1996 | 鋼管的無損檢測第1部分:驗證無縫和焊接鐵磁鋼管(埋弧焊除外)水壓密封性的自動電磁檢測 Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-1:1996 |
| DIN EN10246-3-2000 | 鋼管的無損檢測第3部分:探測無縫和焊接鋼管(埋弧焊接除外)不完整性的自動渦流檢測Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; German version EN 10246-3:1999 |
| DIN EN 10246-4-2000 | 鋼管的無損檢測第4部分:探測鐵磁無縫鋼管橫向不完整性的自動全圓周磁探頭/磁漏檢測 Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999 |
| DIN EN 10246-5-2000 | 鋼管的無損檢測第5部分:探測無縫和焊接(埋弧焊接除外)鐵磁鋼管縱向不完整性的自動全圓周磁探頭/磁漏檢測 Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections; German version EN 10246-5:1999 |
| DIN EN10246-18-2000 | 鋼管的無損檢測第18部分:探測無縫和焊接鐵磁鋼管管端層狀不完整性的磁粉檢驗 Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; German version EN 10246-18:2000 |
| DIN EN 12084-2001 | 無損檢測 渦流檢測一般原理和基本指南
Non-destructivetesting - Eddy current testing - General principles and basicguidelines; German version EN 12084:2001 |
| DIN EN 13860-1-2003 | 無損檢測 渦流檢驗 設備特性和驗證第1部分:儀器特性和驗證
Non-destructive testing - Eddy current examination; Equipmentcharacteristics and verification - Part 1: Instrumentcharacteristics and verification; German version EN13860-1:2003 |
| DIN EN 13860-2-2003 | 無損檢測 渦流檢驗 設備特性和驗證第2部分:探頭特性和驗證
Non-destructive testing - Eddy current examination; Equipmentcharacteristics and verification - Part 2: Probe characteristicsand verification; German version EN 13860-2:2003 |
| DIN EN ISO2178-1995 | 磁性基體上的非磁性涂鍍層 涂鍍層厚度測量磁性法
Non-magnetic coatingson magnetic substrates - Measurement of coating thickness -Magnetic method (ISO 2178:1982); German version EN ISO2178:1995 |
| DIN EN ISO2360-1995 | 非磁性基體金屬上的非導體涂層 涂層厚度測量渦流法
Non-conductive coatingson non-magnetic basis metals - Measurement of coating thickness -Eddy current method (ISO 2360:1982); German version EN ISO2360:1995 |
| DIN EN ISO2361-1995 | 磁性和非磁性基體上的鎳電鍍層 鍍層厚度測量磁性法
Electrodeposited nickelcoatings on magnetic and non-magnetic substrates - Measurement ofcoating thickness - Magnetic method (ISO 2361:1982); German versionEN ISO 2361:1995 |
| DIN EN ISO9934-1-2002 | 無損檢測 磁粉檢測第1部分:一般原理
Non-destructivetesting - Magnetic particle testing - Part 1: General principles(ISO 9934-1:2001); German version EN ISO 9934-1:2001 |
| DIN EN ISO9934-2-2003 | 無損檢測 磁粉檢測第2部分:探測介質
Non-destructivetesting - Magnetic particle testing - Part 2: Detection media (ISO9934-2:2002); German version EN ISO 9934-2:2002 |
| DIN EN ISO9934-3-2002 | 無損檢測 磁粉檢測第3部分:設備
Non-destructivetesting - Magnetic particle testing - Part 3: Equipment (ISO9934-3:2002); German version EN ISO 9934-3:2002 |
| 英國: |
| BS 1881-204-1988 | 混凝土試驗-電磁式保護層厚度計應用的推薦方法 |
| BS 3680/3H:1993 | 利用線圈全部長、寬的電磁方法 |
| BS 3683-2-1985 | 無損檢測術語 磁粉探傷
Glossary of terms used innon-destructive testing - Magnetic particle flaw detection |
| BS 3683Pt.5-83 | 渦流檢測名詞術語 |
| BS 3889Pt.2A-86(1991) | 管道和管子無損檢測方法鍛鋼管的渦流檢測 |
| BS 3889Pt.2B-82 | 管道和管子無損檢測方法有色金屬管的渦流檢測 |
| BS4069-82 | 磁粉探傷用磁粉及磁懸液(INDT,84-2) |
| BS4080/1: | 用磁粉探傷顯示表面缺陷 |
| BS4397-69 | 焊縫的磁粉檢測方法(WSTS,85-4) |
| BS 4408Pt.1-69 | 混凝土復蓋層的電磁測量方法 |
| BS4489:1984 | 無損檢測中評定黑光的方法 |
| BS5044-73(1987) | 磁粉探傷用反差增強涂料 |
| BS5138-74(2000) | 精加工整體鍛造及落錘鍛曲軸的磁粉檢驗 |
| BS 5411Pt.3-84 | 非磁性基體上非導電復蓋層厚度的渦流檢測 |
| BS 5411Pt.9-84 | 非磁性基體上鍍鎳層厚度的磁性檢測方法 |
| BS 5411Pt.11-84 | 磁性基體上非磁性復蓋層厚度的磁性測量方法 |
| BS6072-81(1986) | 缺陷的磁粉檢驗方法(81年版在INDT 84-2) |
| BS 6404-5-1995 | 磁性材料 永磁(硬磁)材料磁性能測量方法
Magnetic materials- Permanent magnet (magnetically hard) materials - Methods ofmeasurement of magnetic properties |
| BS DD ENV50166-1-1995 | 人體電磁場照射 低頻(0 Hz 至 10kHz)
Human exposure toelectromagnetic fields - Low frequency (0 Hz to 10 kHz) |
| BS DD ENV50166-2-1995 | 人體電磁場照射 高頻(10 kHz 至 300GHz)
Human exposure toelectromagnetic fields - High frequency (10 kHz to 300 GHz) |
| BS M35 | 材料及工件的磁粉檢驗 |
| BS EN 1290-1998 | 焊縫的無損檢驗 焊縫的磁粉檢驗
Non-destructive examination of welds -Magnetic particle examination of welds |
| BS EN 1291-1998 | 焊縫的無損檢驗 焊縫的磁粉檢驗驗收等級
Non-destructiveexamination of welds - Magnetic particle testing of welds -Acceptance levels |
| BS EN 1330-5-1998 | 無損檢測術語-渦流檢測 Non-destructivetesting - Terminology - Terms used in eddy current testing |
| BS EN 1369-1997 | 鑄造-磁粉檢驗 Founding - Magneticparticle inspection |
| BS EN 10228-1-1999 | 鍛鋼件無損檢測-磁粉檢驗Non-destructive testing of steelforgings - Magnetic particle inspection |
| BS EN 10246-1-1996 | 鋼管的無損檢測-鐵磁性無縫與焊接（埋弧焊除外）鋼管驗證水壓試驗的自動電磁檢測
Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| BS EN 10246-2-2000 | 鋼管的無損檢測-奧氏體與奧氏體-鐵素體無縫與焊接（埋弧焊除外）鋼管驗證水壓試驗的自動渦流檢測 |
| BS EN 10246-3-2000 | 鋼管的無損檢測-探測無縫與焊接（埋弧焊除外）鋼管不完整性的自動渦流檢測
Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| BS EN 10246-4-2000 | 鋼管的無損檢測-鐵磁性無縫鋼管橫向不完整性自動全圓周磁探頭/漏磁檢測
Non-destructive testing of steel tubes -Automatic full peripheral magnetic transducer/flux leakage testingof seamless ferromagnetic steel tubes for the detection oftransverse imperfections |
| BS EN 10246-5-2000 | 鋼管的無損檢測-鐵磁性無縫與焊接（埋弧焊除外）鋼管縱向不完整性自動全圓周磁探頭/漏磁檢測 Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
| BS EN 10246-12-2000 | 鋼管的無損檢測探測無縫和焊接鐵磁鋼管表面不完整性的磁粉檢驗
Non-destructive testing of steel tubes - Magnetic particleinspection of seamless and welded ferromagnetic steel tubes for thedetection of surface imperfections |
| BS EN 10246-18-2000 | 鋼管的無損檢測探測無縫和焊接鐵磁鋼管管端層狀不完整性的磁粉檢驗
Non-destructive testing of steel tubes - Magnetic particleinspection of tube ends of seamless and welded ferromagnetic steeltubes for the detection of laminar imperfections |
| BS EN 12084-2001 | 無損檢測-渦流檢測-一般原理與指南
Non-destructive testing - Eddy current testing - Generalprinciples and guidelines |
| BS EN ISO 2178-1995 | 磁性基體上非磁性涂層的厚度測量-磁性法
Non-magnetic coatings on magnetic substrates - Measurement ofcoating thickness - Magnetic method |
| BS EN ISO 2360-1995 | 非磁性金屬基體上非導電涂層的厚度測量-渦流法
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method |
| BS EN ISO 2361-1995 | 磁性和非磁性基體上鎳鍍層的厚度測量-磁性法
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method |
| BS EN ISO9934-1-2001 | 無損檢測 磁粉檢測 一般原理Non-destructive testing - Magneticparticle testing - General principles |
| BS EN ISO9934-2-2002 | 無損檢測 磁粉檢測 探測介質Non-destructive testing - Magneticparticle testing - Detection media |
| BS EN ISO9934-3-2002 | 無損檢測 磁粉檢測 設備Non-destructive testing - Magneticparticle testing - Equipment |
| 法國: |
| NFA04-101-64 | 冶金產品磁粉檢測(磁懸液檢測) |
| NFA04-121-74 | 鋼制長條形制品表面缺陷的磁粉檢驗 |
| NF A04-193-1997 | 鑄造 磁粉檢驗 Founding - Magnetic particle inspection. |
| NF A05-115-1999 | 銅及銅合金 管子的渦流檢測Copper and copper alloys. Eddy currenttest for tubes. |
| NF A09-020-5-1998 | 無損檢測術語第5部分:渦流檢測
Non-destructivetesting. Terminology. Part 5 : terms used in Eddy Currenttesting. |
| NFA09-125-82 | 冶金制件磁粉探傷的一般原理 |
| NF A09-160-2001 | 無損檢測 渦流檢測一般原理和指南
Non-destructivetesting - Eddy current testing - General principles andguidelines. |
| NF A09-590-1-2002 | 無損檢測 磁粉檢測第1部分:一般原理
Non-destructivetesting - Magnetic particle testing - Part 1 : generalprinciple. |
| NF A09-590-3-2002 | 無損檢測 磁粉檢測第3部分：設備
Non-destructivetesting - Magnetic particle testing - Part 3 : equipment. |
| NFA49-871-81 | 鐵磁性鋼管縱向缺陷的探頭檢漏法檢測 |
| NFA49-872-83 | 穿過式線圈法的鋼管渦流探傷 |
| NF A49-875-1-1996 | 鋼管的無損檢測第1部分:無縫和焊接鐵磁鋼管(埋弧焊除外)驗證水壓試驗的自動電磁檢測 Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness. |
| NF A49-875-2-2000 | 鋼管的無損檢測第2部分:無縫和焊接奧氏體和奧氏體鐵素體鋼管(埋弧焊除外)驗證水壓試驗的自動渦流檢測 Non-destructive testing of steel tubes - Part 2 :automatic eddy current testing of seamless and welded (exceptsubmerged arc-welded) austenitic and austenitic-ferritic steeltubes for verification of hydraulic leak-tightness. |
| NF A49-875-3-2000 | 鋼管的無損檢測第3部分:探測無縫和焊接鋼管(埋弧焊除外)不完整性的自動渦流檢測 Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections. |
| NF A49-875-4-2000 | 鋼管的無損檢測第4部分:探測無縫鐵磁鋼管橫向不完整性的自動全圓周磁探頭/磁漏檢測 Non-destructive testing of steel tubes - Part 4 : automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections. |
| NF A49-875-5-2000 | 鋼管的無損檢測第5部分:探測無縫和焊接(除埋弧焊)鐵磁鋼管縱向不完整性的自動全圓周磁探頭/漏磁檢測 Non-destructive testing of steel tubes - Part 5 :automatic full peripheral magnetic transducer/flux leakage testingof seamless and welded (except submerged arc welded) ferromagneticsteel tubes for the detection of longitudinal imperfections. |
| NF A49-875-12-2000 | 鋼管的無損檢測第12部分:探測無縫和焊接鐵磁鋼管表面不完整性的磁粉檢驗
Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections. |
| NF A49-875-18-2000 | 鋼管的無損檢測第18部分:探測無縫和焊接鐵磁鋼管管端層狀不完整性的磁粉檢驗 Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections. |
| NF A89-550-1998 | 焊縫的無損檢驗 焊縫的磁粉檢驗
Non-destructive examination of welds -Magnetic particle examination of welds. |
| NF A89-550/A1-2002 | 焊縫的無損檢測 焊縫的磁粉檢測
Non-destructive testing of welds -Magnetic particle testing of welds. |
| NF A89-551-1998 | 焊縫的無損檢驗 焊縫的磁粉檢測驗收等級
Non-destructiveexamination of welds - Magnetic particle testing of welds -Acceptance levels. |
| NF A89-551/A1-2002 | 焊縫的無損檢測 焊縫的磁粉檢測驗收等級
Non-destructivetesting of welds - Magnetic particle testing of welds - Acceptancelevels. |
| NF A91-112-1995 | 磁性基體上的非磁性涂層 涂層厚度測量磁性法
Non-magnetic coatingson magnetic substrates. Measurement of coating thickness. Magneticmethod. |
| NFA91-113-1995 | 非磁性基體金屬上的非導電涂層 涂層厚度測量渦流法
Non-conductive coatingson non-magnetic basis metals. Measurement of coating thickness.Eddy current method. |
| NF A91-120-1995 | 磁性和非磁性基體上的鎳電鍍層 鍍層厚度測量磁性法
Electrodeposited nickelcoatings on magnetic and non-magnetic substrates. Measurement ofcoating thickness. Magnetic method. |
| NF F01-141-1987 | 鐵路車輛 傳動齒輪 磁檢驗Rolling stock. Running gear.Magnetoscopic examination. |
| 前蘇聯: |
| гост19793-74 | 磁力探傷機及磁化設備一般技術要求 |
| гост21105-75 | 磁粉檢測方法 |
| ПИ1.2.238-83 | 材料與零件質量的渦流無損檢測 |
| РТМ1.2.020-81 | 航空零件的磁粉法檢驗 |