| 國際標準: |
| ISO 2400-72E | 用于校準超聲檢測設備的鋼焊件參考試塊(用于t≤50mm鋼管焊縫)(INDT,82-4)
Welds in steel -- Reference block forthe calibration of equipment for ultrasonic examination |
| ISO 4064-3-99 | 封閉管道中液體流量的測量使用速調整超聲流量計法 |
| ISO 4386/1:1992 | 金屬多層滑動軸承第1部分：粘接強度的超聲無損檢驗
Plainbearings -- Metallic multilayer plain bearings -- Part 1:Non-destructive ultrasonic testing of bond |
| ISO 4386/2 | 金屬多層滑動軸承第2部分：支承面金屬層厚度≥2mm的粘接破壞性試驗 |
| ISO 5180-80 | 超聲檢驗用鋼制校準試塊 |
| ISO 5577:2000 | 無損檢測--超聲檢測--術語
Non-destructive testing -- Ultrasonic inspection --Vocabulary |
| ISO 9303:1989 | 無縫和焊接(埋弧焊除外)承壓鋼管--探測縱向缺陷的全圓周超聲檢驗
Seamless and welded (except submerged arc-welded) steeltubes for pressure purposes -- Full peripheral ultrasonictesting for the detection of longitudinal imperfections |
| ISO 9305:1989 | 無縫承壓鋼管--探測橫向缺陷的全圓周超聲檢驗
Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections |
| ISO 9764:1989 | 電阻焊和感應焊承壓鋼管--探測焊縫縱向缺陷的超聲檢驗
Electric resistance and induction welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal imperfections |
| ISO 9765:1990 | 埋弧焊承壓鋼管--探測焊縫縱向及/或橫向缺陷的超聲檢驗
Submerged arc-welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections |
| ISO 10124:1994 | 受壓無縫和焊制（埋弧焊除外）鋼管分層缺陷的超聲檢測
Seamless andwelded (except submerged arc-welded) steel tubes for pressurepurposes -- Ultrasonic testing for the detection of laminarimperfections |
| ISO 10332:1994 | 受壓無縫和焊制（埋弧焊除外）鋼管驗證水壓密封性的超聲檢測
Seamless andwelded (except submerged arc-welded) steel tubes for pressurepurposes -- Ultrasonic testing for the verification of hydraulicleak-tightness |
| ISO 10375:2002 | 無損檢測--超聲檢驗--探頭及其聲場的表征
Non-destructive testing -- Ultrasonic inspection - - Characterization of search unit and sound field |
| ISO 10543:1993 | 無縫和熱拉縮徑焊接承壓鋼管--全圓周超聲厚度檢查
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing |
| ISO 11496:1993 | 無縫和焊接承壓鋼管--探測管端頭分層缺陷的超聲檢驗
Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections |
| ISO12094:1994 | 受壓焊制鋼管焊制鋼管制造用鋼帶/鋼板分層缺陷的超聲檢測
Welded steel tubes for pressure purposes -- Ultrasonic testingfor the detection of laminar imperfections in strips/plates used inthe manufacture of welded tubes |
| ISO12710:2002 | 無損檢測 超聲檢測超聲檢測儀的電子特性評估
Non-destructive testing -- Ultrasonic inspection -- Evaluatingelectronic characteristics of ultrasonic test instruments |
| ISO 12713:1998 | 無損檢測--聲發射檢測--換能器的初次校正
Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers |
| ISO 12714:1999 | 無損檢測--聲發射檢查--聲發射傳感器的二次校準
Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors |
| ISO 12715:1999 | 無損檢測--超聲檢測--表征接觸式探頭聲束輪廓的參考試塊和測試方法
Ultrasonic non-destructive testing -- Referenceblocks and test procedures for the characterization of contactsearch unit beam profiles |
| ISO 12716:2001 | 無損檢測--聲發射檢驗--術語
Non-destructive testing -- Acousticemission inspection -- Vocabulary |
| ISO13663:1995 | 受壓焊制鋼管焊縫附近分層缺陷的超聲檢測
Welded steeltubes for pressure purposes -- Ultrasonic testing of the areaadjacent to the weld seam for the detection of laminarimperfections |
| ISO 17640:2005 | 焊縫無損檢測--焊縫超聲檢測
Non-destructive testing of welds --Ultrasonic testing of welded joints |
| ISO 18175:2004 | 無損檢測--超聲脈沖回波檢測系統工作特性評價（不用電子測量儀器）
Non-destructive testing -- Evaluating performancecharacteristics of ultrasonic pulse-echo testing systemswithout the use of electronic measurement instruments |
| ISO DIS 12709:1998 | 用超聲脈沖回波水浸法檢測和評價缺陷 |
| ISO 22825:2006 | 焊縫無損檢測--超聲檢測--奧氏體不銹鋼與鎳基合金焊縫的檢測
Non-destructive testing of welds -- Ultrasonic testing --Testing of welds in austenitic steels and nickel-basedalloys |
| ISO 23279 | 焊縫無損檢測--超聲檢測--焊縫的指示特征 |
| ISO/CD 25902-2 | 鈦管無損檢測--第2部分：超聲檢驗 |
| ISO/DP4992-83 | 鑄鋼件的超聲波檢測(INDT,85-2) |
| ISO(1984-02-07) | 鑄鋼件超聲波探傷草案(WSTS,88-4,5) |
| IIWVC-421-83,VF-141-83 | 焊縫常規超聲檢驗驗收標準(7-100mm鐵素體鋼對接焊縫)(INDT,85-3) |
| IIW DOC V-527-76 | 焊縫超聲檢驗手冊 |
| IIW DOC V-664-79 | 用AVG圖直接評估超聲反射信號的驗收標準(NDT,80-2) |
| 歐洲標準化委員會標準： |
| EN 583/1:1998 | 無損檢測 超聲檢驗第1部分：一般原理
Non-destructivetesting-Ultrasonic examination-Part 1:General principles |
| EN 583/2:2001 | 無損檢測 超聲檢驗第2部分：靈敏度和范圍的調整（NDI，2004.4）(NDT2005.8)
Non-destructive testing-Ultrasonicexamination-Part 2:Sensitivity and range setting |
| EN 583/3:1999 | 無損檢測 超聲檢驗第3部分：透射技術
Non-destructivetesting-Ultrasonic examination-Part 3:Transmission technique |
| EN 583/4:2002/A1:2003 | 無損檢測 超聲檢驗第4部分：垂直于表面的不連續性的檢驗
Non-destructive testing-Ultrasonic examination-Part4:Examination for discontinuities perpendicular to thesurface |
| EN 583/5:2000/A1:2003 | 無損檢測 超聲檢驗第5部分：缺陷的表征和尺寸確定
Non-destructive testing-Ultrasonic examination-Part5:Characterization and sizing of discontinuities |
| ENV 583/6:2000 | 無損檢測 超聲檢驗第6部分：用于缺陷探測和定量的衍射時差法
Non-destructive testing-Ultrasonic examination-Part6:Time-of-flight diffraction technique as a method for detectionand sizing of discontinuities |
| EN 1330/4:2000 | 無損檢測詞匯 超聲檢測所用術語
Non-destructivetesting-Terminology-Part 4:Terms used in ultrasonic testing |
| EN 1330/9:2000 | 無損檢測詞匯 聲發射檢測所用術語 |
| EN 1712:1998(2003) | 焊接的無損檢驗 焊接接頭的超聲檢驗驗收等級
Non-destructive examination of welds-Ultrasonic examination of weldedjoints-Acceptance levels |
| EN 1713:1998(2003) | 焊接的無損檢驗 超聲檢驗焊縫中的顯示特征
Non-destructive examination of welds-Ultrasonicexamination-Characterization of indications in welds |
| EN 1714:1997(2003) | 焊接的無損檢驗焊接接頭的超聲檢驗
Non-destructive examination of welds-Ultrasonicexamination of welded joints |
| EN 10160:1999 | 厚度等于或大于6mm鋼制平產品厚度的超聲檢測 |
| EN 10228/3:1998 | 鋼鍛件無損檢測鐵素體或馬氏體鋼鍛件的超聲檢測 |
| EN 10228/4:1999 | 鋼鍛件無損檢測奧氏體和奧氏體鐵素體不銹鋼鍛件的超聲檢測 |
| EN 10246/6:1999 | 鋼管的無損檢測無縫鋼管橫向缺陷的全圓周超聲檢測 |
| EN 10246/7:1996 | 鋼管的無損檢測無縫和焊接（埋弧焊除外）鋼管縱向缺陷的自動全圓周超聲檢測 |
| EN 10246/8:1999 | 鋼管的無損檢測電焊鋼管焊縫縱向缺陷的自動超聲檢測 |
| EN 10246/9:2000 | 鋼管的無損檢測埋弧焊鋼管焊縫縱向及/或橫向缺陷的自動超聲檢測 |
| EN 10246/13:2000 | 鋼管的無損檢測無縫和焊接（埋弧焊除外）鋼管全圓周自動超聲測厚 |
| EN 10246/14:1999 | 鋼管的無損檢測無縫和焊接（埋弧焊除外）鋼管層狀缺陷的自動超聲檢測 |
| EN 10246/15:2000 | 鋼管的無損檢測制造焊接鋼管用的帶材/中厚板層狀缺陷的自動超聲檢測 |
| EN 10246/16:2000 | 鋼管的無損檢測焊接鋼管焊縫附近區域?qū)訝钊毕莸淖詣映暀z測 |
| EN 10246/17:2000 | 鋼管的無損檢測無縫和焊接鋼管管端面層狀缺陷的超聲檢測 |
| EN 12223:2000 | 無損檢測 超聲檢驗1號校準塊規范
Non-destructivetesting-Ultrasonic examination-Specification for calibration blockNo.1 |
| EN 12668/1:2000/A1:2004 | 超聲檢驗設備的特性和校驗第1部分：儀器
Non-destructivetesting-Characterization and verification of ultrasonic examinationequipment-Part 1:Instruments |
| EN 12668/2:2001/A1:2004 | 超聲檢驗設備的特性和校驗第2部分：探頭
Non-destructivetesting-Characterization and verification of ultrasonic examinationequipment-Part 2:Probes |
| EN 12668/3:2000/A1:2004 | 超聲檢驗設備的特性和校驗第3部分：組合設備
Non-destructivetesting-Characterization and verification of ultrasonic examinationequipment-Part 3:Combined equipment |
| EN 13477/1:2001 | 無損檢測 聲發射 設備表征第1部分：設備描述
Non-destructivetesting-Acoustic emission-Equipment characterisation-Part1:Equipment description |
| EN 13477/2:2001 | 無損檢測 聲發射 設備表征第2部分：工作特性的校驗
Non-destructive testing-Acoustic emission-Equipmentcharacterisation-Part 2:Verification of operatingcharacteristic |
| EN 13554:2002/A1:2003 | 無損檢測 聲發射 一般原理Non-destructive testing-Acousticemission-General principles |
| EN 138052-1:2001 | 超聲測厚 |
| EN 138052-2:2001 | 超聲自動檢測 |
| EN 14127:2004 | 無損檢測 超聲測厚Non-destructive testing-Ultrasonicthickness measurement |
| CEN/TS 14751:2004 | 焊縫超聲TOFD法檢測 |
| EN 27963:1992 | 用于焊縫超聲檢驗的2號校準試塊規范
Weldsin steel-Calibration block No.2 for ultrasonic examination ofwelds(ISO 7963:1985) |
| EN 61161: | 在液體中頻率范圍0.5MHz~25MHz超聲功率測量規范 |
| EN WI-188:1999 | 奧氏體鋼焊縫超聲檢測方法 |
| EN WI-189:1999 | 鋁和鋁合金焊縫超聲檢測方法 |
| EN WI-190:1999 | 金屬焊縫超聲自動檢測方法 |
| EN WI-191:2000 | 鋼電子束和激光焊縫超聲檢測方法 |
| 前蘇聯標準: |
| гост 21397-75 | 鋁合金制品超聲檢測用標準試塊的基本參數與技術要求 |
| гост 23702-79 | 超聲換能器基本參數及其測量方法(INDT,83-3) |
| гост 23667-79 | 超聲探傷儀基本參數測量方法 |
| гост 23049-78 | 超聲檢測的一般技術要求 |
| гост 22727-77 | 薄鋼板致密性的超聲檢測 |
| гост 22368-77 | 對接焊縫超聲檢測的缺陷分類 |
| гост 21120-75 | 圓,方,矩形截面棒材與坯料的超聲回波法檢測 |
| гост 20415-82 | 聲學檢測一般規則 |
| гост 18576-80 | 鐵路鋼軌的超聲檢測 |
| гост 17410-78 | 圓柱形無縫金屬管的超聲檢測 |
| гост 14782-76 | 焊縫的超聲檢測 |
| гост 12503-75 | 鋼的超聲檢測一般要求 |
| гост 51017-71 | 渦輪機K-200-130-1轉子鍛件制造標準(含超聲檢測標準) |
| ПИ1.2. 032-77 | 航空發動機渦**和壓氣機盤的超聲檢驗 |
| OCT1 90250-77 | 無損檢驗 用于航空技術裝備的半成品和零件的超聲檢驗對檢驗方法內容和編制的一般要求 |
| ISO 5948-81E | 鐵路機車車輛部件的超聲波驗收試驗(車輛,車輪及輪箍)(NDT,87-4) |
| ISO5948:1994(E) | 鐵道車輛材料-超聲波驗收檢驗(NDT2002-3)
Railwayrolling stock material -- Ultrasonic acceptance testing |
| ISO 6721/8:1997 | 塑料-動態力學性能的測定第8部分：縱波和橫波傳播法 |
| ISO 6721/9:1997 | 塑料-動態力學性能的測定 第9部分：拉伸振動-聲脈沖傳播法 |
| ISO 7963:2006 | 無損檢測--超聲檢測--鋼焊縫--2號校正試塊的規范
Welds insteel -- Calibration block No. 2 for ultrasonic examination ofwelds |